Mô tả
Dimensions
| Bevel angle [°] | 0,00 ° |
| Length of bevel f4 | 0,5 mm |
| Bevel angle f4 [°] | 0,00 ° |
Production and installation tolerances
General properties
| Density | 1.72 g/cm3 |
| Color | brown |
| Max. moisture absorption (at 23 °C/73 °F, 50% r.h.) | 0.1 Wt.-%, test method DIN 53495 |
| Max. water absorption | 0.2 Wt.-% |
| Coefficient of sliding friction, dynamic, against steel | 0.07 – 0.30 μ |
| pv value, max. (dry) | 0.58 MPa ⋅ m/s |
| Radioactive radiation max. | 2 ⋅ 102 Gy |
Mechanical properties
| Modulus of elasticity | 10,300 MPa, test method DIN 53457 |
| Flexural strength (at 20 °C/68 °F) | 210 MPa, test method DIN 53452 |
| Pressure load | 109 MPa |
| Shore-D Hardness | 88, test method DIN 53505 |
| Max. recommended surface pressure (at +20 °C/68 °F) | 110,0 MPa |
| Maximum running speed, oscillating, short-term | 0,7 m/s |
| Maximum running speed, rotating, continous | 0,9 m/s |
| Maximum running speed, rotating, short-term | 1,0 m/s |
| Maximum running speed, oscillating, continous | 0,6 m/s |
| Maximum running speed, linear, continous | 2,5 m/s |
| Maximum running speed, linear, short-term | 3,0 m/s |
Physical and thermal properties
| Max. long-term application temperature | 200 °C |
| Max. short-term application temperature | 240 °C |
| Lower application temperature | -40 °C |
| Heat conductivity | 0.24 W/(m ⋅ K), test method ASTM C 177 |
| Thermal expansion coefficient (at 23°C/73°F) | 4 K-1 ⋅ 10-5, test method DIN 53752 |
Electrical properties
| Specific volume resistance | > 1015 Ωcm, test method DIN IEC 93 |
| Surface resistance | > 1014 Ω, test method DIN 53482 |
