Mô tả
Information
Technical data
Product name | Technical Data | Parameter |
ACCUMULATION CHAIN 08B | Pitch p (mm) | 12.7 |
Width between inner plates b1 min. (mm) | 7.75 | |
Roller diameter d1 max. (mm) | 8.51 | |
Pin diameter d2 max. (mm) | 4.45 | |
Pin length b4 max. (mm) | 27 | |
Total width inner link b2 max. (mm) | 11.35 | |
Width over outer plates b5 max. (Mm) (JWIS: b4) | 14.5 | |
Conveyer roller diameter d5 (mm) (JWIS: D) | 16 | |
Width over conveyer roller b8 (mm) (JWIS: b) | 7.55 | |
Weight per meter (kg) | 0.802 | |
Traverse pitch pt (mm) (JWIS: e) | 18.7 | |
Max. Load per conveyor roller (kg) | 6 |
Product Information
JWIS accumulation conveyor chains have external rollers on both sides which, on the one hand, engage in the toothing of the sprocket to transmit power and, on the other hand, support the chain in the profile. Their specialty is that the sockets in the inner link protrude slightly, thus avoiding contact corrosion between the inner link and the outer link. All 1/2 “and 3/4” JWIS accumulation chains are equipped with smooth running rollers made of sintered metal which always run extremely smoothly and are not slowed down by lubricant. This means that your system can be built 30% longer without changing the drive motors or smaller drive units can be used with the same conveyor length.
The special thing about our IPW-lubricated accumulator chains:
- JWIS accumulation chains are dry on the outside
- The conveyed material does not come into contact with the lubricant
- No over-lubrication and therefore no “dripping” in application-related areas
- A clean environment is guaranteed
- The chain does not pick up any dirt / particles / fibers / dust
application areas
- Logistics systems, warehouse technology
- Electronics industry and circuit board production
- Conveyor technology
- Packaging industry
- food industry
- Building materials, glass and ceramics industries
- Pharmaceutical industry, medical technology