Mô tả
Dimensions
| Ø d1 | 3,0 mm |
| Outer diameter d2 | 4,5 mm |
| Flange diameter d3 | 7,5 mm |
| Bearing length b1 | 5,00 mm |
| Flange thickness b2 | 0,75 mm |
| Length of bevel f1 | 0,5 mm |
| Bevel angle [°] | 30,00 ° |
Production and installation tolerances
| d1-Tolerance bearing | +0.014 +0.054 mm, E10 |
| d1 after press-fit (max.) | 3,054 mm |
| d1 after press-fit (min.) | 3,014 mm |
General properties
| Density | 1.48 g/cm3 |
| Color | grey |
| Max. moisture absorption (at 23 °C/73 °F, 50% r.h.) | 0.3 Wt.-%, test method DIN 53495 |
| Max. water absorption | 1.3 Wt.-% |
| Coefficient of sliding friction, dynamic, against steel | 0.06 – 0.20 μ |
| pv value, max. (dry) | 0.30 MPa ⋅ m/s |
Mechanical properties
| Modulus of elasticity | 2,350 MPa, test method DIN 53457 |
| Flexural strength (at 20 °C/68 °F) | 70 MPa, test method DIN 53452 |
| Pressure load | 55 MPa |
| Shore-D Hardness | 74, test method DIN 53505 |
| Max. recommended surface pressure (at +20 °C/68 °F) | 35,0 MPa |
Physical and thermal properties
| Max. long-term application temperature | 90 °C |
| Max. short-term application temperature | 120 °C |
| Lower application temperature | -50 °C |
| Heat conductivity | 0.25 W/(m ⋅ K), test method ASTM C 177 |
| Thermal expansion coefficient (at 23°C/73°F) | 10 K-1 ⋅ 10-5, test method DIN 53752 |
Electrical properties
| Specific volume resistance | > 1013 Ωcm, test method DIN IEC 93 |
| Surface resistance | > 1012 Ω, test method DIN 53482 |
