Mô tả
Dimensions
| Ø d1 | 5,0 mm |
| Ø d2 | 6,2 mm |
| Flange diameter d3 | 6,8 mm |
| Ø d4 | 8,0 mm |
| b1 Total length | 3,20 mm |
| Thickness s | 0,6 mm |
| Flange thickness b2.1 | 0,60 mm |
| Flange thickness b2.2 | 0,60 mm |
| B | 2,00 mm |
General properties
| Material | iglidur® K230 |
| Density | 1.36 g/cm3 |
| Color | anthracite |
| Max. moisture absorption (at 23 °C/73 °F, 50% r.h.) | 0.8 Wt.-%, test method DIN 53495 |
| Max. water absorption | 2.9 Wt.-% |
| Coefficient of sliding friction, dynamic, against steel | N/A |
| pv value, max. (dry) | N/A |
| Radioactive radiation max. | Not yet available |
Mechanical properties
| Modulus of elasticity | 1,600 MPa, test method DIN 53457 |
| Flexural strength (at 20 °C/68 °F) | 40 MPa |
| Pressure load | 40 MPa |
| Shore-D Hardness | 68, test method DIN 53505 |
| Max. recommended surface pressure (at +20 °C/68 °F) | 38,0 MPa |
| Maximum running speed, linear, short-term | 0,0 m/s |
| Maximum running speed, rotating, continous | 0,0 m/s |
| Maximum running speed, rotating, short-term | 0,0 m/s |
| Maximum running speed, oscillating, continous | 0,0 m/s |
| Maximum running speed, oscillating, short-term | 0,0 m/s |
| Maximum running speed, linear, continous | 0,0 m/s |
Physical and thermal properties
| Max. long-term application temperature | 110 °C |
| Max. short-term application temperature | 130 °C |
| Lower application temperature | -30 °C |
| Heat conductivity | Not available yet |
| Thermal expansion coefficient (at 23°C/73°F) | Not available yet |
| Max. long-term application temperature | 90°C up to 130°C |
Electrical properties
| Specific volume resistance | > 1012 Ωcm, test method DIN IEC 93 |
| Surface resistance | > 1012 Ω, test method DIN 53482 |
